Materials

The right material for your application, geometry, and production volume.

Tenco offers a carefully selected range of materials across DLP, SLS, SLA, and FDM processes. Every material has been evaluated for performance, consistency, and suitability for series production. Use the overview below to find the right material for your application — or contact us to discuss your specific requirements.

Downlad the whole overview here

General Purpose

Specials

Elastomers

Transparent

GENERAL PURPOSE

Material Process HDT (°C) Tensile Strength Tensile Modulus Elongation at Break Flexural Modulus Shore Hardness Tolerance Color
Raplas RR60WH SLA 54°C 54 MPa 2920 MPa 5% 2670 MPa 81 D 0.1 mm White
Loctite IND403 DLP 80°C 70 MPa 2600 MPa 10% 2700 MPa 80 D 0.1 mm Black
Loctite 3D 3843 DLP 63°C 51 MPa 1800 MPa 43% 1800 MPa 75 D 0.1 mm Black
BASF Ultracur ST80 B DLP 52°C 35 MPa 1650 MPa 25% 2700 MPa 77 D 0.1 mm Black
PA12 SLS 130°C 48 MPa 1600 MPa 18% 1500 MPa 75 D 0.4 mm White
PA11 SLS 176°C 52 MPa 1750 MPa 28% 1750 MPa 80 D 0.4 mm White
PLA FDM 57°C 70 MPa 3300 MPa 8% 2800 MPa 85 D 0.3 mm Any color
PETG FDM 69°C 39 MPa 1800 MPa 8% 1800 MPa 76 D 0.3 mm Any color
ABS FDM 87°C 35 MPa 1900 MPa 4% 2300 MPa 76 D 0.3 mm Any color

SPECIALS

Material Process HDT (°C) Tensile Strength Tensile Modulus Elongation at Break Flexural Modulus Shore Hardness Tolerance Color
Loctite IND3380 DLP 190°C 50 MPa 3000 MPa 2% 3400 MPa 86 D 0.2 mm Black
EnvisionTEC RCP30 DLP 67°C 46 MPa 3600 MPa 2% 3860 MPa 93 D 0.1 mm Orange
BASF Ultracur RG3280 DLP 284°C 87 MPa 10 600 MPa 1% 8780 MPa 96 D 0.2 mm White
PLA-CF FDM 91°C 48 MPa 4950 MPa 2% 6320 MPa 85 D 0.3 mm Black
PA6-CF FDM 215°C 105 MPa 7450 MPa 3% 6500 MPa 80 D 0.3 mm Black
ASA FDM 88°C 45 MPa 1300 MPa 10% 3200 MPa 68 D 0.3 mm Any color
PAGF SLS 179°C 27 MPa 4000 MPa 3% 3120 MPa 77 D 0.4 mm Grey
PACF SLS 181°C 84 MPa 8500 MPa 4% 7000 MPa 80 D 0.4 mm Dark Gray
Etec HTM 140 DLP 140°C 56 MPa 3800 MPa 3% 3350 MPa 80 D 0.1 mm Dark Green
Iglidur® i3000-PR DLP 80°C 43 MPa 1750 MPa 3.5% 3310 MPa 78 0.1 mm Grey
colorFabb FDM 90°C 85 MPa 3800 MPa 4% — — 0.3 mm Blue
3Dresyn CR UHT DLP 220°C 43 MPa 3000 MPa 2% — — 0.1 mm Blue
3Dresyn® PEEK-like DLP 110°C 60 MPa 2500–3000 MPa 3% — 85–90 D 0.1 mm Black/Clear
ABS-Like Resin Pro 2 DLP 60–65°C 35–45 MPa 1600–1800 MPa 35–40% 1400–1800 MPa 82–84 D 0.1 mm Black/White
Iglidur® i4000-PR-1000 DLP 63–80°C 37 MPa 1139 MPa 3–5% 1672 MPa 73 D 0.1 mm Dark Grey

ELASTOMERS

Material Process Tensile Strength Tensile Modulus Elongation at Break Shore Hardness Tolerance Color
BASF Ultracur FL300 DLP 5 MPa 2 MPa 245% 40 A 0.2 mm Clear
Loctite IND475 B DLP 3 MPa 2.5 MPa 140% 48 A 0.2 mm Black
Loctite IND475 W DLP 5 MPa 1 MPa 160% 62 A 0.2 mm White
BASF Ultracur EL60 DLP 9 MPa 4 MPa 95% 75 A 0.2 mm Clear
BASF Ultracur EL4000 DLP 11 MPa 7 MPa 170% 90 A 0.2 mm Clear
TPU FDM 39 MPa 26 MPa 580% 95 A 0.4 mm Black
TPU SLS 8 MPa 70 MPa 101% 88 A 0.5 mm Grey

TRANSPARENT

Material Process HDT (°C) Tensile Strength Tensile Modulus Elongation at Break Flexural Modulus Shore Hardness Tolerance Color
Raplas RR60CL SLA 55°C 52 MPa 2500 MPa 8% 2000 MPa 83 D 0.1 mm Clear
BASF Ultracur ST45 DLP 73°C 60 MPa 2300 MPa 2% 2400 MPa 80 D 0.1 mm Black/White

Didn’t find the right material? Start a Test Track to find the right material!

Disclaimer: Material performance may vary depending on printer settings, part geometry, and specific applications. All information is based on data from the respective material suppliers and is subject to change without notice. For optimal results, we recommend consulting with us before selecting a material and referring to the latest datasheet provided by the supplier.