Materialen
Materialen voor Additive Manufacturing
Tenco biedt een zorgvuldig geselecteerd assortiment materialen voor DLP-, SLS-, SLA- en FDM-processen. Elk materiaal is beoordeeld op prestaties, consistentie en geschiktheid voor serieproductie. Gebruik onderstaand overzicht om het juiste materiaal voor uw toepassing te vinden, of neem contact met ons op om uw specifieke wensen te bespreken.
GENERAL PURPOSE
| Material | Process | HDT (°C) | Tensile Strength | Tensile Modulus | Elongation at Break | Flexural Modulus | Shore Hardness | Tolerance | Color |
|---|---|---|---|---|---|---|---|---|---|
| Raplas RR60WH | SLA | 54°C | 54 MPa | 2920 MPa | 5% | 2670 MPa | 81 D | 0.1 mm | White |
| Loctite IND403 | DLP | 80°C | 70 MPa | 2600 MPa | 10% | 2700 MPa | 80 D | 0.1 mm | Black |
| Loctite 3D 3843 | DLP | 63°C | 51 MPa | 1800 MPa | 43% | 1800 MPa | 75 D | 0.1 mm | Black |
| BASF Ultracur ST80 B | DLP | 52°C | 35 MPa | 1650 MPa | 25% | 2700 MPa | 77 D | 0.1 mm | Black |
| PA12 | SLS | 130°C | 48 MPa | 1600 MPa | 18% | 1500 MPa | 75 D | 0.4 mm | White |
| PA11 | SLS | 176°C | 52 MPa | 1750 MPa | 28% | 1750 MPa | 80 D | 0.4 mm | White |
| PLA | FDM | 57°C | 70 MPa | 3300 MPa | 8% | 2800 MPa | 85 D | 0.3 mm | Any color |
| PETG | FDM | 69°C | 39 MPa | 1800 MPa | 8% | 1800 MPa | 76 D | 0.3 mm | Any color |
| ABS | FDM | 87°C | 35 MPa | 1900 MPa | 4% | 2300 MPa | 76 D | 0.3 mm | Any color |
SPECIALS
| Material | Process | HDT (°C) | Tensile Strength | Tensile Modulus | Elongation at Break | Flexural Modulus | Shore Hardness | Tolerance | Color |
|---|---|---|---|---|---|---|---|---|---|
| Loctite IND3380 | DLP | 190°C | 50 MPa | 3000 MPa | 2% | 3400 MPa | 86 D | 0.2 mm | Black |
| EnvisionTEC RCP30 | DLP | 67°C | 46 MPa | 3600 MPa | 2% | 3860 MPa | 93 D | 0.1 mm | Orange |
| BASF Ultracur RG3280 | DLP | 284°C | 87 MPa | 10 600 MPa | 1% | 8780 MPa | 96 D | 0.2 mm | White |
| PLA-CF | FDM | 91°C | 48 MPa | 4950 MPa | 2% | 6320 MPa | 85 D | 0.3 mm | Black |
| PA6-CF | FDM | 215°C | 105 MPa | 7450 MPa | 3% | 6500 MPa | 80 D | 0.3 mm | Black |
| ASA | FDM | 88°C | 45 MPa | 1300 MPa | 10% | 3200 MPa | 68 D | 0.3 mm | Any color |
| PAGF | SLS | 179°C | 27 MPa | 4000 MPa | 3% | 3120 MPa | 77 D | 0.4 mm | Grey |
| PACF | SLS | 181°C | 84 MPa | 8500 MPa | 4% | 7000 MPa | 80 D | 0.4 mm | Dark Gray |
| Etec HTM 140 | DLP | 140°C | 56 MPa | 3800 MPa | 3% | 3350 MPa | 80 D | 0.1 mm | Dark Green |
| Iglidur® i3000-PR | DLP | 80°C | 43 MPa | 1750 MPa | 3.5% | 3310 MPa | 78 | 0.1 mm | Grey |
| colorFabb | FDM | 90°C | 85 MPa | 3800 MPa | 4% | — | — | 0.3 mm | Blue |
| 3Dresyn CR UHT | DLP | 220°C | 43 MPa | 3000 MPa | 2% | — | — | 0.1 mm | Blue |
| 3Dresyn® PEEK-like | DLP | 110°C | 60 MPa | 2500–3000 MPa | 3% | — | 85–90 D | 0.1 mm | Black/Clear |
| ABS-Like Resin Pro 2 | DLP | 60–65°C | 35–45 MPa | 1600–1800 MPa | 35–40% | 1400–1800 MPa | 82–84 D | 0.1 mm | Black/White |
| Iglidur® i4000-PR-1000 | DLP | 63–80°C | 37 MPa | 1139 MPa | 3–5% | 1672 MPa | 73 D | 0.1 mm | Dark Grey |
ELASTOMEREN
| Material | Process | Tensile Strength | Tensile Modulus | Elongation at Break | Shore Hardness | Tolerance | Color |
|---|---|---|---|---|---|---|---|
| BASF Ultracur FL300 | DLP | 5 MPa | 2 MPa | 245% | 40 A | 0.2 mm | Clear |
| Loctite IND475 B | DLP | 3 MPa | 2.5 MPa | 140% | 48 A | 0.2 mm | Black |
| Loctite IND475 W | DLP | 5 MPa | 1 MPa | 160% | 62 A | 0.2 mm | White |
| BASF Ultracur EL60 | DLP | 9 MPa | 4 MPa | 95% | 75 A | 0.2 mm | Clear |
| BASF Ultracur EL4000 | DLP | 11 MPa | 7 MPa | 170% | 90 A | 0.2 mm | Clear |
| TPU | FDM | 39 MPa | 26 MPa | 580% | 95 A | 0.4 mm | Black |
| TPU | SLS | 8 MPa | 70 MPa | 101% | 88 A | 0.5 mm | Grey |
Disclaimer:
Materiaalprestaties kunnen variëren afhankelijk van printerinstellingen, onderdeelgeometrie en specifieke toepassingen. Alle informatie is gebaseerd op gegevens van de betreffende materiaalleveranciers en kan zonder voorafgaande kennisgeving worden gewijzigd. Voor optimale resultaten adviseren wij u ons te raadplegen vóór de materiaalkeuze en de meest recente datasheet van de leverancier te raadplegen.
