{"id":5586,"date":"2026-04-27T12:16:48","date_gmt":"2026-04-27T11:16:48","guid":{"rendered":"https:\/\/www.tenco-ddm.com\/?page_id=5586"},"modified":"2026-06-01T14:24:17","modified_gmt":"2026-06-01T13:24:17","slug":"materials","status":"publish","type":"page","link":"https:\/\/www.tenco-ddm.com\/en\/materials\/","title":{"rendered":"Materials"},"content":{"rendered":"

Materials<\/h1><\/div><\/div><\/div><\/div><\/div>

The right material for your application, geometry, and production volume.<\/h2>\n

Tenco offers a carefully selected range of materials across DLP, SLS, SLA, and FDM processes. Every material has been evaluated for performance, consistency, and suitability for series production. Use the overview below to find the right material for your application \u2014 or contact us to discuss your specific requirements.<\/p>\n<\/div>

<\/div><\/div><\/div>
<\/div><\/div><\/a>
Downlad the whole overview here<\/a><\/span><\/h5>\n<\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/a><\/span>

General Purpose<\/h2><\/div><\/div><\/div><\/div><\/div>
<\/span><\/a><\/span>
<\/a><\/span>

Specials<\/h2><\/div><\/div><\/div><\/div><\/div>
<\/a><\/span>

Elastomers<\/h2><\/div><\/div><\/div><\/div><\/div>
<\/a><\/span>

Transparent<\/h2><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div>

GENERAL PURPOSE<\/h3>\n<\/div><\/div><\/div>
<\/i>Request a sample<\/span><\/a><\/div><\/div><\/div>
<\/div>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Material<\/th>\nProcess<\/th>\nHDT (\u00b0C)<\/th>\nTensile Strength<\/th>\nTensile Modulus<\/th>\nElongation at Break<\/th>\nFlexural Modulus<\/th>\nShore Hardness<\/th>\nTolerance<\/th>\nColor<\/th>\n<\/tr>\n<\/thead>\n
Raplas RR60WH<\/td>\nSLA<\/td>\n54\u00b0C<\/td>\n54 MPa<\/td>\n2920 MPa<\/td>\n5%<\/td>\n2670 MPa<\/td>\n81 D<\/td>\n0.1 mm<\/td>\nWhite<\/td>\n<\/tr>\n
Loctite IND403<\/td>\nDLP<\/td>\n80\u00b0C<\/td>\n70 MPa<\/td>\n2600 MPa<\/td>\n10%<\/td>\n2700 MPa<\/td>\n80 D<\/td>\n0.1 mm<\/td>\nBlack<\/td>\n<\/tr>\n
Loctite 3D 3843<\/td>\nDLP<\/td>\n63\u00b0C<\/td>\n51 MPa<\/td>\n1800 MPa<\/td>\n43%<\/td>\n1800 MPa<\/td>\n75 D<\/td>\n0.1 mm<\/td>\nBlack<\/td>\n<\/tr>\n
BASF Ultracur ST80 B<\/td>\nDLP<\/td>\n52\u00b0C<\/td>\n35 MPa<\/td>\n1650 MPa<\/td>\n25%<\/td>\n2700 MPa<\/td>\n77 D<\/td>\n0.1 mm<\/td>\nBlack<\/td>\n<\/tr>\n
PA12<\/td>\nSLS<\/td>\n130\u00b0C<\/td>\n48 MPa<\/td>\n1600 MPa<\/td>\n18%<\/td>\n1500 MPa<\/td>\n75 D<\/td>\n0.4 mm<\/td>\nWhite<\/td>\n<\/tr>\n
PA11<\/td>\nSLS<\/td>\n176\u00b0C<\/td>\n52 MPa<\/td>\n1750 MPa<\/td>\n28%<\/td>\n1750 MPa<\/td>\n80 D<\/td>\n0.4 mm<\/td>\nWhite<\/td>\n<\/tr>\n
PLA<\/td>\nFDM<\/td>\n57\u00b0C<\/td>\n70 MPa<\/td>\n3300 MPa<\/td>\n8%<\/td>\n2800 MPa<\/td>\n85 D<\/td>\n0.3 mm<\/td>\nAny color<\/td>\n<\/tr>\n
PETG<\/td>\nFDM<\/td>\n69\u00b0C<\/td>\n39 MPa<\/td>\n1800 MPa<\/td>\n8%<\/td>\n1800 MPa<\/td>\n76 D<\/td>\n0.3 mm<\/td>\nAny color<\/td>\n<\/tr>\n
ABS<\/td>\nFDM<\/td>\n87\u00b0C<\/td>\n35 MPa<\/td>\n1900 MPa<\/td>\n4%<\/td>\n2300 MPa<\/td>\n76 D<\/td>\n0.3 mm<\/td>\nAny color<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/a><\/div><\/div>

SPECIALS<\/h3>\n<\/div><\/div><\/div>
<\/i>Request a sample<\/span><\/a><\/div><\/div><\/div>

<\/a><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Material<\/th>\nProcess<\/th>\nHDT (\u00b0C)<\/th>\nTensile Strength<\/th>\nTensile Modulus<\/th>\nElongation at Break<\/th>\nFlexural Modulus<\/th>\nShore Hardness<\/th>\nTolerance<\/th>\nColor<\/th>\n<\/tr>\n<\/thead>\n
Loctite IND3380<\/td>\nDLP<\/td>\n190\u00b0C<\/td>\n50 MPa<\/td>\n3000 MPa<\/td>\n2%<\/td>\n3400 MPa<\/td>\n86 D<\/td>\n0.2 mm<\/td>\nBlack<\/td>\n<\/tr>\n
EnvisionTEC RCP30<\/td>\nDLP<\/td>\n67\u00b0C<\/td>\n46 MPa<\/td>\n3600 MPa<\/td>\n2%<\/td>\n3860 MPa<\/td>\n93 D<\/td>\n0.1 mm<\/td>\nOrange<\/td>\n<\/tr>\n
BASF Ultracur RG3280<\/td>\nDLP<\/td>\n284\u00b0C<\/td>\n87 MPa<\/td>\n10 600 MPa<\/td>\n1%<\/td>\n8780 MPa<\/td>\n96 D<\/td>\n0.2 mm<\/td>\nWhite<\/td>\n<\/tr>\n
PLA-CF<\/td>\nFDM<\/td>\n91\u00b0C<\/td>\n48 MPa<\/td>\n4950 MPa<\/td>\n2%<\/td>\n6320 MPa<\/td>\n85 D<\/td>\n0.3 mm<\/td>\nBlack<\/td>\n<\/tr>\n
PA6-CF<\/td>\nFDM<\/td>\n215\u00b0C<\/td>\n105 MPa<\/td>\n7450 MPa<\/td>\n3%<\/td>\n6500 MPa<\/td>\n80 D<\/td>\n0.3 mm<\/td>\nBlack<\/td>\n<\/tr>\n
ASA<\/td>\nFDM<\/td>\n88\u00b0C<\/td>\n45 MPa<\/td>\n1300 MPa<\/td>\n10%<\/td>\n3200 MPa<\/td>\n68 D<\/td>\n0.3 mm<\/td>\nAny color<\/td>\n<\/tr>\n
PAGF<\/td>\nSLS<\/td>\n179\u00b0C<\/td>\n27 MPa<\/td>\n4000 MPa<\/td>\n3%<\/td>\n3120 MPa<\/td>\n77 D<\/td>\n0.4 mm<\/td>\nGrey<\/td>\n<\/tr>\n
PACF<\/td>\nSLS<\/td>\n181\u00b0C<\/td>\n84 MPa<\/td>\n8500 MPa<\/td>\n4%<\/td>\n7000 MPa<\/td>\n80 D<\/td>\n0.4 mm<\/td>\nDark Gray<\/td>\n<\/tr>\n
Etec HTM 140<\/td>\nDLP<\/td>\n140\u00b0C<\/td>\n56 MPa<\/td>\n3800 MPa<\/td>\n3%<\/td>\n3350 MPa<\/td>\n80 D<\/td>\n0.1 mm<\/td>\nDark Green<\/td>\n<\/tr>\n
Iglidur\u00ae i3000-PR<\/td>\nDLP<\/td>\n80\u00b0C<\/td>\n43 MPa<\/td>\n1750 MPa<\/td>\n3.5%<\/td>\n3310 MPa<\/td>\n78<\/td>\n0.1 mm<\/td>\nGrey<\/td>\n<\/tr>\n
colorFabb<\/td>\nFDM<\/td>\n90\u00b0C<\/td>\n85 MPa<\/td>\n3800 MPa<\/td>\n4%<\/td>\n\u2014<\/td>\n\u2014<\/td>\n0.3 mm<\/td>\nBlue<\/td>\n<\/tr>\n
3Dresyn CR UHT<\/td>\nDLP<\/td>\n220\u00b0C<\/td>\n43 MPa<\/td>\n3000 MPa<\/td>\n2%<\/td>\n\u2014<\/td>\n\u2014<\/td>\n0.1 mm<\/td>\nBlue<\/td>\n<\/tr>\n
3Dresyn\u00ae PEEK-like<\/td>\nDLP<\/td>\n110\u00b0C<\/td>\n60 MPa<\/td>\n2500\u20133000 MPa<\/td>\n3%<\/td>\n\u2014<\/td>\n85\u201390 D<\/td>\n0.1 mm<\/td>\nBlack\/Clear<\/td>\n<\/tr>\n
ABS-Like Resin Pro 2<\/td>\nDLP<\/td>\n60\u201365\u00b0C<\/td>\n35\u201345 MPa<\/td>\n1600\u20131800 MPa<\/td>\n35\u201340%<\/td>\n1400\u20131800 MPa<\/td>\n82\u201384 D<\/td>\n0.1 mm<\/td>\nBlack\/White<\/td>\n<\/tr>\n
Iglidur\u00ae i4000-PR-1000<\/td>\nDLP<\/td>\n63\u201380\u00b0C<\/td>\n37 MPa<\/td>\n1139 MPa<\/td>\n3\u20135%<\/td>\n1672 MPa<\/td>\n73 D<\/td>\n0.1 mm<\/td>\nDark Grey<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>
<\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/a><\/div><\/div>

ELASTOMERS<\/h3>\n<\/div><\/div><\/div>
<\/i>Request a sample<\/span><\/a><\/div><\/div><\/div>
<\/div>\n\n\n\n\n\n\n\n\n\n\n\n
Material<\/th>\nProcess<\/th>\nTensile Strength<\/th>\nTensile Modulus<\/th>\nElongation at Break<\/th>\nShore Hardness<\/th>\nTolerance<\/th>\nColor<\/th>\n<\/tr>\n<\/thead>\n
BASF Ultracur FL300<\/td>\nDLP<\/td>\n5 MPa<\/td>\n2 MPa<\/td>\n245%<\/td>\n40 A<\/td>\n0.2 mm<\/td>\nClear<\/td>\n<\/tr>\n
Loctite IND475 B<\/td>\nDLP<\/td>\n3 MPa<\/td>\n2.5 MPa<\/td>\n140%<\/td>\n48 A<\/td>\n0.2 mm<\/td>\nBlack<\/td>\n<\/tr>\n
Loctite IND475 W<\/td>\nDLP<\/td>\n5 MPa<\/td>\n1 MPa<\/td>\n160%<\/td>\n62 A<\/td>\n0.2 mm<\/td>\nWhite<\/td>\n<\/tr>\n
BASF Ultracur EL60<\/td>\nDLP<\/td>\n9 MPa<\/td>\n4 MPa<\/td>\n95%<\/td>\n75 A<\/td>\n0.2 mm<\/td>\nClear<\/td>\n<\/tr>\n
BASF Ultracur EL4000<\/td>\nDLP<\/td>\n11 MPa<\/td>\n7 MPa<\/td>\n170%<\/td>\n90 A<\/td>\n0.2 mm<\/td>\nClear<\/td>\n<\/tr>\n
TPU<\/td>\nFDM<\/td>\n39 MPa<\/td>\n26 MPa<\/td>\n580%<\/td>\n95 A<\/td>\n0.4 mm<\/td>\nBlack<\/td>\n<\/tr>\n
TPU<\/td>\nSLS<\/td>\n8 MPa<\/td>\n70 MPa<\/td>\n101%<\/td>\n88 A<\/td>\n0.5 mm<\/td>\nGrey<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div><\/div>
<\/a><\/div><\/div>

TRANSPARENT<\/h3>\n<\/div><\/div><\/div>
<\/i>Request a sample<\/span><\/a><\/div><\/div><\/div>
<\/div>\n\n\n\n\n\n\n
Material<\/th>\nProcess<\/th>\nHDT (\u00b0C)<\/th>\nTensile Strength<\/th>\nTensile Modulus<\/th>\nElongation at Break<\/th>\nFlexural Modulus<\/th>\nShore Hardness<\/th>\nTolerance<\/th>\nColor<\/th>\n<\/tr>\n<\/thead>\n
Raplas RR60CL<\/td>\nSLA<\/td>\n55\u00b0C<\/td>\n52 MPa<\/td>\n2500 MPa<\/td>\n8%<\/td>\n2000 MPa<\/td>\n83 D<\/td>\n0.1 mm<\/td>\nClear<\/td>\n<\/tr>\n
BASF Ultracur ST45<\/td>\nDLP<\/td>\n73\u00b0C<\/td>\n60 MPa<\/td>\n2300 MPa<\/td>\n2%<\/td>\n2400 MPa<\/td>\n80 D<\/td>\n0.1 mm<\/td>\nBlack\/White<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>

Didn’t find the right material? Start a Test Track to find the right material!<\/h3>\n<\/div><\/div><\/div>
<\/i>Ask for a test track!<\/span><\/a><\/div><\/div><\/div><\/div><\/div>

Disclaimer:<\/strong> Material performance may vary depending on printer settings, part geometry, and specific applications. All information is based on data from the respective material suppliers and is subject to change without notice. For optimal results, we recommend consulting with us before selecting a material and referring to the latest datasheet provided by the supplier.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"footnotes":""},"class_list":["post-5586","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/pages\/5586","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/comments?post=5586"}],"version-history":[{"count":171,"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/pages\/5586\/revisions"}],"predecessor-version":[{"id":6733,"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/pages\/5586\/revisions\/6733"}],"wp:attachment":[{"href":"https:\/\/www.tenco-ddm.com\/en\/wp-json\/wp\/v2\/media?parent=5586"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}